You will get a list of everything in the kit so you can check everything by part number, you will get a manual to help you during assembly. The kit must be assembled by a qualified mechanic, just because you know how to tighten a nut does not make you qualified.
Here is what you will get however none of the parts are painted, first lay out all your items in a section that wont be messed with, we put all from boxes in order on a bench or on the floor.
Put a loose bolt in all the threaded holes in the frame, tape off any area that is not to get paint, spray it and set aside to fry while you check out and lay out the items to be assembled.
Install neck cups, finger tighten seat and tank in place, temporally clip on rear fender, mount rear section of frame and shocks, do not drill until you put on rear tire and position rear fender, remove rear tire and lay out mount holes when fender is in proper place.
After locating and drilling mount holes in rear fender finger tighten it in place, replace rear tire, set engine and transmission in place finger tight and get ready to align.
